Not yet rated Add your review
Cube 360-2V has 2 vertical lines and a horizontal line of 360°, Incl. tripod in bag.
The line laser ADA CUBE 360 2V is a measuring instrument that is appreciated by both professional users and home users for its functions. Thanks to the special laser diode, it projects a horizontal beam of 360 degrees. It is an ideal tool for construction and repair work.
Convenient marking. The line laser projects 2 vertical lines and a horizontal line of 360°. It is not necessary to rotate the device for horizontal marking. Simply place the ADA CUBE 360 2V at the chosen height. The horizontal bar will run along the perimeter. When the vertical line is switched on, there is a projection of 90° (laser cross). It is possible to switch off the laser lines separately. Simply select the line you need for a job.
Accurate leveling. Automatic self-leveling. ADA CUBE 360 2V is characterised by high accuracy - the error is only 0.3 mm/m.
Receiver mode. There is a receiver mode for outdoor use in bright light. The range of the marker increases from 20 to 70 m. (Receiver ADA LR-60)
Two attachment points. It is possible to place the ADA CUBE 360 2V on the tripod or mount it on the wall thanks to the 1/4" thread. One thread is located on the back of the unit, the other on the bottom.
TILT mode. In this mode, it is possible to tilt the instrument to any angle. It is sufficient to lock the pendulum and turn the on/off switch to the middle position. The laser beams are projected with the desired tilt. This function is used, for example, when adjusting stair railings.
Line laser Cube 360-2V
Batteries and target plate in a bag.